Commands not fully executing - FIXED

For software support - get help from Cymatic and the community

Re: Commands not fully executing

Postby Gavin » Tue Nov 14, 2017 10:56 pm

Thanks Tony,

Yes I look forward to hearing further results, thank you.

Kind regards,

Gavin
User avatar
Gavin
Site Admin
 
Posts: 3835
Joined: Wed Jan 23, 2013 9:11 pm
Location: United Kingdom

Re: Commands not fully executing

Postby Gavin » Tue Nov 14, 2017 11:43 pm

Hi Tony95,

I think I have found a problem with greening that occurs when using Polling. I haven't seen the problem occurring when using streaming.

I will continue to investigate what might be causing the problem when using polling and hopefully I will find the cause.

Thanks for your help, I'll post an update here as soon as I know more. In the meantime if you have any problems with using streaming, or notice any other patterns to the problems, please tell me.

Kind regards,

Gavin
User avatar
Gavin
Site Admin
 
Posts: 3835
Joined: Wed Jan 23, 2013 9:11 pm
Location: United Kingdom

Re: Commands not fully executing

Postby Gavin » Wed Nov 15, 2017 3:10 am

Hi Tony95,

I have fixed that problem affecting offsetting bets in polling mode.

I have also fixed a bug affecting the offsetting of partially matched bets, that applied to both streaming and polling modes.

The software will update itself next time you open it.

Thank you for your patience and for helping me to find the problem. You were very helpful. 😊

Kind regards,

Gavin
User avatar
Gavin
Site Admin
 
Posts: 3835
Joined: Wed Jan 23, 2013 9:11 pm
Location: United Kingdom

Re: Commands not fully executing - FIXED

Postby tony95 » Wed Nov 15, 2017 8:45 am

Hi Gavin,

Thanks for the fix. Do I still need to have conflation set at 500ms?

Regards
Tony95
tony95
 
Posts: 46
Joined: Sun Feb 22, 2015 7:58 pm

Re: Commands not fully executing - FIXED

Postby Gavin » Wed Nov 15, 2017 10:13 am

Hi Tony95,

No not really, unless you notice your internet connection to Betfair dropping out periodically (prices freezing). It will automatically reconnect if that happens, but obviously it is better to avoid it dropping out in the first place by using a Conflation setting above zero if you find it necessary to do so.

Thanks again for your help tracking the issue.

Kind regards,

Gavin
User avatar
Gavin
Site Admin
 
Posts: 3835
Joined: Wed Jan 23, 2013 9:11 pm
Location: United Kingdom

Re: Commands not fully executing - FIXED

Postby svilen13 » Wed Nov 22, 2017 1:21 pm

Hi Gavin. I noticed a problem with the command KEEP sent by an Excel. If the command is the following example:

BACK KEEPGreen Offset74

The price Offset74 is not KEEP. I have seen this after the big update.
Thanks!
svilen13
 
Posts: 7
Joined: Thu Oct 01, 2015 2:23 pm

Re: Commands not fully executing - FIXED

Postby Gavin » Wed Nov 22, 2017 1:59 pm

Hi svilen13,

Thank you for that information, about the persistence type of the offset bet not being inherited from the original bet, in some situations.

I found the cause of that and it will be fixed in the next version that I hope to release within the next 1-2 days.

It did not affect live mode when using streaming mode. It only affected demo mode or live mode when using polling mode.

Thanks and kind regards,

Gavin
User avatar
Gavin
Site Admin
 
Posts: 3835
Joined: Wed Jan 23, 2013 9:11 pm
Location: United Kingdom

Re: Commands not fully executing - FIXED

Postby svilen13 » Wed Nov 22, 2017 2:20 pm

Thank you so much!
svilen13
 
Posts: 7
Joined: Thu Oct 01, 2015 2:23 pm

Re: Commands not fully executing - FIXED

Postby Gavin » Thu Nov 23, 2017 12:55 am

Hi svilen13,

The new version 6.0.10.0 has now been released which fixes the persistence type (e.g. keep) of offset bets, re: polling mode, or streaming mode combined with demo mode.

The software updates itself to the latest version automatically when you open it.

Thanks again for reporting it.

Kind regards,

Gavin
User avatar
Gavin
Site Admin
 
Posts: 3835
Joined: Wed Jan 23, 2013 9:11 pm
Location: United Kingdom

Re: Commands not fully executing - FIXED

Postby svilen13 » Thu Nov 23, 2017 1:05 am

Thanks Gavin! I tested - everything worked properly.
Cheers!
svilen13
 
Posts: 7
Joined: Thu Oct 01, 2015 2:23 pm

PreviousNext

Return to General Help / Support

Who is online

Users browsing this forum: No registered users and 0 guests

cron